| GNOME r12 OMAP4 test results |
 |
 |
 |
|
The following tests were performed on a Panda system running the GNOME r12 image from this site. The root file system was ext3 on a 4GB TOPRAM microSD card. LTPThe Linux™ Test Project is a joint project started by SGI™ and maintained by IBM®, that has a goal to deliver test suites to the open source community that validate the reliability, robustness, and stability of Linux. The LTP testsuite contains a collection of tools for testing the Linux kernel and related features. The results from building and running the October 2010 Stable version of the test on r12 are available here. Failed tests are under investigation and the goal for future releases is to pass this test with no failures. GtkPerfGtkPerf is an application designed to test GTK+ performance. It runs a set of predefined GTK+ widgets (opening comboboxes, toggling buttons, scrolling text yms) to benchmark performance. The results from building and running GtkPerf 0.40 on r11 are available here. |
| Last Updated on Monday, 27 December 2010 21:11 |
Latest Articles
- GNOME builds for OMAP3
- How to write an UBIFS rootfs image to NAND
- How to write the Linux kernel to NAND
- How to write u-boot to NAND
- How to write x-loader to NAND
- An overview of OMAP3 power management with 2.6.39-pm
- How to add a serial 7 segment display to Overo
- How to enable Linux swapping
- How to customize use of the LEDs on OMAP development boards
- How to add a serial console to Overo Thumbo/Pinto
Popular Articles
- Preparing a bootable SD/microSD card
- MicroSD card performance test results
- A script for partitioning/formatting a bootable SD/microSD card
- How to develop MSP430 Launchpad code on Linux
- Gnome image screenshots
- An overview of OMAP3 power management with 2.6.39-pm
- How to write an UBIFS rootfs image to NAND
- How to control NetworkManger from the command line
- How to customize use of the LEDs on OMAP development boards
- How to add a serial console to Overo Thumbo/Pinto
Advertisement
Advertisement
New Articles