Search
|
The Linux virtual memory system divides physical RAM into chucks of memory called pages. Swapping is the process of copying inactive pages of RAM to a reserved area of non-volatile storage, called swa...
NOTE: Work in progress, additional results will be added periodically
Introduction
Anyone who has worked with SD cards in embedded systems has probably noticed that the brand of card can make a ...
One usually interacts with GNOME NetworkManager via the GUI interface. There are occasions when a command line interface would be quite useful. The nmcli command is the proper tool for those occ...
The GNOME image distributed from this site requires the user to login at boot.
Requiring a login is good for security, but often becomes burdensome during development when reboots are a routine occu...
The following tests were performed on a Panda system running the GNOME r12 image from this site. The root file system was ext3 on a 4GB TOPRAM microSD card.
LTP
The Linux™ Test Project is a...
The following tests were performed on a Gumstix Overo Fire/Tobi system running the GNOME r12 image from this site. The root file system was ext3 on a 4GB Trancend microSD card.
LTP
The Linu...
Daily GNOME image builds are now available for all versions of Beagle, Overo, and Panda.
OMAP3 builds are based on Linux version 2.6.36 and GNOME version 2.30.
OMAP4 builds are based on ...
The following tests were performed on a Gumstix Overo Fire/Tobi system running the OMAP3 r11 Gnome image from this site. The root file system was ext3 on an 8GB Class 6 Trancend microSD card.
LTP ...
The beta r11 Gnome image for Beagleboard and Overo is available in the Downloads section. The image provides Gnome version 2.28 and Linux version 2.6.32
The image includes:
Basic sy...
The OMAP4 images on this site will automatically set the display resolution to match your monitor.
Unfortunately this capability isn't yet available for the OMAP3 images. The simplest method to cu...
The OMAP4 images on this site will automatically set the display resolution to match your monitor.
Unfortunately this capability isn't yet available for the OMAP3 images. The simplest method to cu...
|
Latest Articles
- GNOME builds for OMAP3
- How to write an UBIFS rootfs image to NAND
- How to write the Linux kernel to NAND
- How to write u-boot to NAND
- How to write x-loader to NAND
- An overview of OMAP3 power management with 2.6.39-pm
- How to add a serial 7 segment display to Overo
- How to enable Linux swapping
- How to customize use of the LEDs on OMAP development boards
- How to add a serial console to Overo Thumbo/Pinto
Popular Articles
- Preparing a bootable SD/microSD card
- MicroSD card performance test results
- A script for partitioning/formatting a bootable SD/microSD card
- Gnome image screenshots
- How to develop MSP430 Launchpad code on Linux
- An overview of OMAP3 power management with 2.6.39-pm
- How to write an UBIFS rootfs image to NAND
- How to control NetworkManger from the command line
- How to customize use of the LEDs on OMAP development boards
- How to add a serial console to Overo Thumbo/Pinto
About
Sakoman Inc. provides consulting and design services for embedded systems.
Services offered include:
- Board bringup and debug
- Embedded Linux ports
- Device drivers
- Kernel modifications
- U-boot ports and customization
- X-load ports and customization
- Root filesystems
- OpenEmbedded support
- Development environment setup
- PCB design and layout
We specialize in the Texas Instruments OMAP family.
You are here :
Advertisement
Advertisement
New Articles